TRACE-CMD-SET(1) libtracefs Manual TRACE-CMD-SET(1)
NAME
trace-cmd-set - set a configuration parameter of the Ftrace Linux
internal tracer
SYNOPSIS
trace-cmd set [OPTIONS] [command]
DESCRIPTION
The trace-cmd(1) set command will set a configuration parameter of the
Ftrace Linux kernel tracer. The specified command will be run after the
ftrace state is set. The configured ftrace state can be restored to
default using the trace-cmd-reset(1) command.
OPTIONS
-p tracer
Specify a tracer. Tracers usually do more than just trace an event.
Common tracers are: function, function_graph, preemptirqsoff,
irqsoff, preemptoff and wakeup. A tracer must be supported by the
running kernel. To see a list of available tracers, see
trace-cmd-list(1).
-e event
Specify an event to trace. Various static trace points have been
added to the Linux kernel. They are grouped by subsystem where you
can enable all events of a given subsystem or specify specific
events to be enabled. The event is of the format
"subsystem:event-name". You can also just specify the subsystem
without the :event-name or the event-name without the "subsystem:".
Using "-e sched_switch" will enable the "sched_switch" event where
as, "-e sched" will enable all events under the "sched" subsystem.
The 'event' can also contain glob expressions. That is, "*stat*" will
select all events (or subsystems) that have the characters "stat" in their
names.
The keyword 'all' can be used to enable all events.
-T
Enable a stacktrace on each event. For example:
<idle>-0 [003] 58549.289091: sched_switch: kworker/0:1:0 [120] R ==> trace-cmd:2603 [120]
<idle>-0 [003] 58549.289092: kernel_stack: <stack trace>
=> schedule (ffffffff814b260e)
=> cpu_idle (ffffffff8100a38c)
=> start_secondary (ffffffff814ab828)
--func-stack
Enable a stack trace on all functions. Note this is only applicable
for the "function" plugin tracer, and will only take effect if the
-l option is used and succeeds in limiting functions. If the
function tracer is not filtered, and the stack trace is enabled,
you can live lock the machine.
-f filter
Specify a filter for the previous event. This must come after a -e.
This will filter what events get recorded based on the content of
the event. Filtering is passed to the kernel directly so what
filtering is allowed may depend on what version of the kernel you
have. Basically, it will let you use C notation to check if an
event should be processed or not.
==, >=, <=, >, <, &, |, && and ||
The above are usually safe to use to compare fields.
-R trigger
Specify a trigger for the previous event. This must come after a
-e. This will add a given trigger to the given event. To only
enable the trigger and not the event itself, then place the event
after the -v option.
See Documentation/trace/events.txt in the Linux kernel source for more
information on triggers.
-v
This will negate options specified after it on the command line. It
affects:
-e: Causes all specified events to not be traced. This is useful for
selecting a subsystem to be traced but to leave out various events.
For example: "-e sched -v -e "*stat*"" will enable all events in
the sched subsystem except those that have "stat" in their names.
-B: Deletes the specified ftrace instance. There must be no
configuration options related to this instance in the command line.
For example: "-v -B bar -B foo" will delete instance bar and create
a new instance foo.
Note: the -v option was taken from the way grep(1) inverts the following
matches.
-P pid
This will filter only the specified process IDs. Using -P will let
you trace only events that are caused by the process.
-c
Used -P to trace the process' children too (if kernel supports it).
--user
Execute the specified command as given user.
-C clock
Set the trace clock to "clock".
Use trace-cmd(1) list -C to see what clocks are available.
-l function-name
This will limit the function and function_graph tracers to only
trace the given function name. More than one -l may be specified on
the command line to trace more than one function. The limited use
of glob expressions are also allowed. These are match* to only
filter functions that start with match. *match to only filter
functions that end with match. *match\* to only filter on
functions that contain match.
-g function-name
This option is for the function_graph plugin. It will graph the
given function. That is, it will only trace the function and all
functions that it calls. You can have more than one -g on the
command line.
-n function-name
This has the opposite effect of -l. The function given with the -n
option will not be traced. This takes precedence, that is, if you
include the same function for both -n and -l, it will not be
traced.
-d
Some tracer plugins enable the function tracer by default. Like the
latency tracers. This option prevents the function tracer from
being enabled at start up.
-D
The option -d will try to use the function-trace option to disable
the function tracer (if available), otherwise it defaults to the
proc file: /proc/sys/kernel/ftrace_enabled, but will not touch it
if the function-trace option is available. The -D option will
disable both the ftrace_enabled proc file as well as the
function-trace option if it exists.
Note, this disable function tracing for all users, which includes users
outside of ftrace tracers (stack_tracer, perf, etc).
-O option
Ftrace has various options that can be enabled or disabled. This
allows you to set them. Appending the text no to an option disables
it. For example: "-O nograph-time" will disable the "graph-time"
Ftrace option.
-b size
This sets the ring buffer size to size kilobytes. Because the
Ftrace ring buffer is per CPU, this size is the size of each per
CPU ring buffer inside the kernel. Using "-b 10000" on a machine
with 4 CPUs will make Ftrace have a total buffer size of 40 Megs.
-B buffer-name
If the kernel supports multiple buffers, this will add a buffer
with the given name. If the buffer name already exists, that buffer
is just reset.
After a buffer name is stated, all events added after that will be
associated with that buffer. If no buffer is specified, or an event
is specified before a buffer name, it will be associated with the
main (toplevel) buffer.
trace-cmd set -e sched -B block -e block -B time -e timer sleep 1
The above is will enable all sched events in the main buffer. It will
then create a 'block' buffer instance and enable all block events within
that buffer. A 'time' buffer instance is created and all timer events
will be enabled for that event.
-m size
The max size in kilobytes that a per cpu buffer should be. Note,
due to rounding to page size, the number may not be totally
correct. Also, this is performed by switching between two buffers
that are half the given size thus the output may not be of the
given size even if much more was written.
Use this to prevent running out of diskspace for long runs.
-M cpumask
Set the cpumask for to trace. It only affects the last buffer
instance given. If supplied before any buffer instance, then it
affects the main buffer. The value supplied must be a hex number.
trace-cmd set -p function -M c -B events13 -e all -M 5
If the -M is left out, then the mask stays the same. To enable all
CPUs, pass in a value of '-1'.
-i
By default, if an event is listed that trace-cmd does not find, it
will exit with an error. This option will just ignore events that
are listed on the command line but are not found on the system.
-q | --quiet
Suppresses normal output, except for errors.
--max-graph-depth depth
Set the maximum depth the function_graph tracer will trace into a
function. A value of one will only show where userspace enters the
kernel but not any functions called in the kernel. The default is
zero, which means no limit.
--cmdlines-size size
Set the number of entries the kernel tracing file "saved_cmdlines"
can contain. This file is a circular buffer which stores the
mapping between cmdlines and PIDs. If full, it leads to unresolved
cmdlines ("<...>") within the trace. The kernel default value is
128.
--module module
Filter a module’s name in function tracing. It is equivalent to
adding :mod:module after all other functions being filtered. If no
other function filter is listed, then all modules functions will be
filtered in the filter.
'--module snd' is equivalent to '-l :mod:snd'
'--module snd -l "*jack*"' is equivalent to '-l "*jack*:mod:snd"'
'--module snd -n "*"' is equivalent to '-n :mod:snd'
--stderr
Have output go to stderr instead of stdout, but the output of the
command executed will not be changed. This is useful if you want to
monitor the output of the command being executed, but not see the
output from trace-cmd.
--fork
If a command is listed, then trace-cmd will wait for that command
to finish, unless the --fork option is specified. Then it will fork
the command and return immediately.
--verbose[=level]
Set the log level. Supported log levels are "none", "critical",
"error", "warning", "info", "debug", "all" or their identifiers
"0", "1", "2", "3", "4", "5", "6". Setting the log level to
specific value enables all logs from that and all previous levels.
The level will default to "info" if one is not specified.
Example: enable all critical, error and warning logs
trace-cmd set --verbose=warning
EXAMPLES
Enable all events for tracing:
# trace-cmd set -e all
Set the function tracer:
# trace-cmd set -p function
SEE ALSO
trace-cmd(1), trace-cmd-report(1), trace-cmd-start(1),
trace-cmd-stop(1), trace-cmd-extract(1), trace-cmd-reset(1),
trace-cmd-split(1), trace-cmd-list(1), trace-cmd-listen(1),
trace-cmd-profile(1)
AUTHOR
Written by Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com[1]>
RESOURCES
https://git.kernel.org/pub/scm/utils/trace-cmd/trace-cmd.git/
COPYING
Copyright (C) 2010 Red Hat, Inc. Free use of this software is granted
under the terms of the GNU Public License (GPL).
NOTES
1. tz.stoyanov@gmail.com
mailto:tz.stoyanov@gmail.com
libtracefs 04/08/2024 TRACE-CMD-SET(1)
Generated by dwww version 1.16 on Tue Dec 16 15:36:46 CET 2025.