semctl(2) System Calls Manual semctl(2)
NAME
semctl - System V semaphore control operations
LIBRARY
Standard C library (libc, -lc)
SYNOPSIS
#include <sys/sem.h>
int semctl(int semid, int semnum, int op, ...);
DESCRIPTION
semctl() performs the control operation specified by op on the System V
semaphore set identified by semid, or on the semnum-th semaphore of
that set. (The semaphores in a set are numbered starting at 0.)
This function has three or four arguments, depending on op. When there
are four, the fourth has the type union semun. The calling program
must define this union as follows:
union semun {
int val; /* Value for SETVAL */
struct semid_ds *buf; /* Buffer for IPC_STAT, IPC_SET */
unsigned short *array; /* Array for GETALL, SETALL */
struct seminfo *__buf; /* Buffer for IPC_INFO
(Linux-specific) */
};
The semid_ds data structure is defined in <sys/sem.h> as follows:
struct semid_ds {
struct ipc_perm sem_perm; /* Ownership and permissions */
time_t sem_otime; /* Last semop time */
time_t sem_ctime; /* Creation time/time of last
modification via semctl() */
unsigned long sem_nsems; /* No. of semaphores in set */
};
The fields of the semid_ds structure are as follows:
sem_perm This is an ipc_perm structure (see below) that specifies the
access permissions on the semaphore set.
sem_otime Time of last semop(2) system call.
sem_ctime Time of creation of semaphore set or time of last semctl()
IPCSET, SETVAL, or SETALL operation.
sem_nsems Number of semaphores in the set. Each semaphore of the set
is referenced by a nonnegative integer ranging from 0 to
sem_nsems-1.
The ipc_perm structure is defined as follows (the highlighted fields
are settable using IPC_SET):
struct ipc_perm {
key_t __key; /* Key supplied to semget(2) */
uid_t uid; /* Effective UID of owner */
gid_t gid; /* Effective GID of owner */
uid_t cuid; /* Effective UID of creator */
gid_t cgid; /* Effective GID of creator */
unsigned short mode; /* Permissions */
unsigned short __seq; /* Sequence number */
};
The least significant 9 bits of the mode field of the ipc_perm struc-
ture define the access permissions for the shared memory segment. The
permission bits are as follows:
0400 Read by user
0200 Write by user
0040 Read by group
0020 Write by group
0004 Read by others
0002 Write by others
In effect, "write" means "alter" for a semaphore set. Bits 0100, 0010,
and 0001 (the execute bits) are unused by the system.
Valid values for op are:
IPC_STAT
Copy information from the kernel data structure associated with
semid into the semid_ds structure pointed to by arg.buf. The
argument semnum is ignored. The calling process must have read
permission on the semaphore set.
IPC_SET
Write the values of some members of the semid_ds structure
pointed to by arg.buf to the kernel data structure associated
with this semaphore set, updating also its sem_ctime member.
The following members of the structure are updated:
sem_perm.uid, sem_perm.gid, and (the least significant 9 bits
of) sem_perm.mode.
The effective UID of the calling process must match the owner
(sem_perm.uid) or creator (sem_perm.cuid) of the semaphore set,
or the caller must be privileged. The argument semnum is ig-
nored.
IPC_RMID
Immediately remove the semaphore set, awakening all processes
blocked in semop(2) calls on the set (with an error return and
errno set to EIDRM). The effective user ID of the calling
process must match the creator or owner of the semaphore set, or
the caller must be privileged. The argument semnum is ignored.
IPC_INFO (Linux-specific)
Return information about system-wide semaphore limits and para-
meters in the structure pointed to by arg.__buf. This structure
is of type seminfo, defined in <sys/sem.h> if the _GNU_SOURCE
feature test macro is defined:
struct seminfo {
int semmap; /* Number of entries in semaphore
map; unused within kernel */
int semmni; /* Maximum number of semaphore sets */
int semmns; /* Maximum number of semaphores in all
semaphore sets */
int semmnu; /* System-wide maximum number of undo
structures; unused within kernel */
int semmsl; /* Maximum number of semaphores in a
set */
int semopm; /* Maximum number of operations for
semop(2) */
int semume; /* Maximum number of undo entries per
process; unused within kernel */
int semusz; /* Size of struct sem_undo */
int semvmx; /* Maximum semaphore value */
int semaem; /* Max. value that can be recorded for
semaphore adjustment (SEM_UNDO) */
};
The semmsl, semmns, semopm, and semmni settings can be changed
via /proc/sys/kernel/sem; see proc(5) for details.
SEM_INFO (Linux-specific)
Return a seminfo structure containing the same information as
for IPC_INFO, except that the following fields are returned with
information about system resources consumed by semaphores: the
semusz field returns the number of semaphore sets that currently
exist on the system; and the semaem field returns the total num-
ber of semaphores in all semaphore sets on the system.
SEM_STAT (Linux-specific)
Return a semid_ds structure as for IPC_STAT. However, the semid
argument is not a semaphore identifier, but instead an index
into the kernel's internal array that maintains information
about all semaphore sets on the system.
SEM_STAT_ANY (Linux-specific, since Linux 4.17)
Return a semid_ds structure as for SEM_STAT. However,
sem_perm.mode is not checked for read access for semid meaning
that any user can employ this operation (just as any user may
read /proc/sysvipc/sem to obtain the same information).
GETALL Return semval (i.e., the current value) for all semaphores of
the set into arg.array. The argument semnum is ignored. The
calling process must have read permission on the semaphore set.
GETNCNT
Return the semncnt value for the semnum-th semaphore of the set
(i.e., the number of processes waiting for the semaphore's value
to increase). The calling process must have read permission on
the semaphore set.
GETPID Return the sempid value for the semnum-th semaphore of the set.
This is the PID of the process that last performed an operation
on that semaphore (but see NOTES). The calling process must
have read permission on the semaphore set.
GETVAL Return semval (i.e., the semaphore value) for the semnum-th sem-
aphore of the set. The calling process must have read permis-
sion on the semaphore set.
GETZCNT
Return the semzcnt value for the semnum-th semaphore of the set
(i.e., the number of processes waiting for the semaphore value
to become 0). The calling process must have read permission on
the semaphore set.
SETALL Set the semval values for all semaphores of the set using
arg.array, updating also the sem_ctime member of the semid_ds
structure associated with the set. Undo entries (see semop(2))
are cleared for altered semaphores in all processes. If the
changes to semaphore values would permit blocked semop(2) calls
in other processes to proceed, then those processes are woken
up. The argument semnum is ignored. The calling process must
have alter (write) permission on the semaphore set.
SETVAL Set the semaphore value (semval) to arg.val for the semnum-th
semaphore of the set, updating also the sem_ctime member of the
semid_ds structure associated with the set. Undo entries are
cleared for altered semaphores in all processes. If the changes
to semaphore values would permit blocked semop(2) calls in other
processes to proceed, then those processes are woken up. The
calling process must have alter permission on the semaphore set.
RETURN VALUE
On success, semctl() returns a nonnegative value depending on op as
follows:
GETNCNT
the value of semncnt.
GETPID the value of sempid.
GETVAL the value of semval.
GETZCNT
the value of semzcnt.
IPC_INFO
the index of the highest used entry in the kernel's internal ar-
ray recording information about all semaphore sets. (This in-
formation can be used with repeated SEM_STAT or SEM_STAT_ANY op-
erations to obtain information about all semaphore sets on the
system.)
SEM_INFO
as for IPC_INFO.
SEM_STAT
the identifier of the semaphore set whose index was given in
semid.
SEM_STAT_ANY
as for SEM_STAT.
All other op values return 0 on success.
On failure, semctl() returns -1 and sets errno to indicate the error.
ERRORS
EACCES The argument op has one of the values GETALL, GETPID, GETVAL,
GETNCNT, GETZCNT, IPC_STAT, SEM_STAT, SEM_STAT_ANY, SETALL, or
SETVAL and the calling process does not have the required per-
missions on the semaphore set and does not have the
CAP_IPC_OWNER capability in the user namespace that governs its
IPC namespace.
EFAULT The address pointed to by arg.buf or arg.array isn't accessible.
EIDRM The semaphore set was removed.
EINVAL Invalid value for op or semid. Or: for a SEM_STAT operation,
the index value specified in semid referred to an array slot
that is currently unused.
EPERM The argument op has the value IPC_SET or IPC_RMID but the effec-
tive user ID of the calling process is not the creator (as found
in sem_perm.cuid) or the owner (as found in sem_perm.uid) of the
semaphore set, and the process does not have the CAP_SYS_ADMIN
capability.
ERANGE The argument op has the value SETALL or SETVAL and the value to
which semval is to be set (for some semaphore of the set) is
less than 0 or greater than the implementation limit SEMVMX.
VERSIONS
POSIX.1 specifies the sem_nsems field of the semid_ds structure as hav-
ing the type unsigned short, and the field is so defined on most other
systems. It was also so defined on Linux 2.2 and earlier, but, since
Linux 2.4, the field has the type unsigned long.
The sempid value
POSIX.1 defines sempid as the "process ID of [the] last operation" on a
semaphore, and explicitly notes that this value is set by a successful
semop(2) call, with the implication that no other interface affects the
sempid value.
While some implementations conform to the behavior specified in
POSIX.1, others do not. (The fault here probably lies with POSIX.1
inasmuch as it likely failed to capture the full range of existing im-
plementation behaviors.) Various other implementations also update
sempid for the other operations that update the value of a semaphore:
the SETVAL and SETALL operations, as well as the semaphore adjustments
performed on process termination as a consequence of the use of the
SEM_UNDO flag (see semop(2)).
Linux also updates sempid for SETVAL operations and semaphore adjust-
ments. However, somewhat inconsistently, up to and including Linux
4.5, the kernel did not update sempid for SETALL operations. This was
rectified in Linux 4.6.
STANDARDS
POSIX.1-2008.
HISTORY
POSIX.1-2001, SVr4.
Various fields in a struct semid_ds were typed as short under Linux 2.2
and have become long under Linux 2.4. To take advantage of this, a re-
compilation under glibc-2.1.91 or later should suffice. (The kernel
distinguishes old and new calls by an IPC_64 flag in op.)
In some earlier versions of glibc, the semun union was defined in
<sys/sem.h>, but POSIX.1 requires that the caller define this union.
On versions of glibc where this union is not defined, the macro
_SEM_SEMUN_UNDEFINED is defined in <sys/sem.h>.
NOTES
The IPC_INFO, SEM_STAT, and SEM_INFO operations are used by the ipcs(1)
program to provide information on allocated resources. In the future
these may modified or moved to a /proc filesystem interface.
The following system limit on semaphore sets affects a semctl() call:
SEMVMX Maximum value for semval: implementation dependent (32767).
For greater portability, it is best to always call semctl() with four
arguments.
EXAMPLES
See shmop(2).
SEE ALSO
ipc(2), semget(2), semop(2), capabilities(7), sem_overview(7),
sysvipc(7)
Linux man-pages 6.7 2024-03-03 semctl(2)
Generated by dwww version 1.16 on Tue Dec 16 11:11:03 CET 2025.