SSH-ADD(1) General Commands Manual SSH-ADD(1)
NAME
ssh-add — adds private key identities to the OpenSSH authentication
agent
SYNOPSIS
ssh-add [-cCDdKkLlqvXx] [-E fingerprint_hash] [-H hostkey_file]
[-h destination_constraint] [-S provider] [-t life] [file ...]
ssh-add -s pkcs11 [-vC] [certificate ...]
ssh-add -e pkcs11
ssh-add -T pubkey ...
DESCRIPTION
ssh-add adds private key identities to the authentication agent,
ssh-agent(1). When run without arguments, it adds the files
~/.ssh/id_rsa, ~/.ssh/id_ecdsa, ~/.ssh/id_ecdsa_sk, ~/.ssh/id_ed25519,
~/.ssh/id_ed25519_sk, and ~/.ssh/id_dsa. After loading a private key,
ssh-add will try to load corresponding certificate information from the
filename obtained by appending -cert.pub to the name of the private key
file. Alternative file names can be given on the command line.
If any file requires a passphrase, ssh-add asks for the passphrase from
the user. The passphrase is read from the user's tty. ssh-add retries
the last passphrase if multiple identity files are given.
The authentication agent must be running and the SSH_AUTH_SOCK environ-
ment variable must contain the name of its socket for ssh-add to work.
The options are as follows:
-c Indicates that added identities should be subject to confirma-
tion before being used for authentication. Confirmation is
performed by ssh-askpass(1). Successful confirmation is sig-
naled by a zero exit status from ssh-askpass(1), rather than
text entered into the requester.
-C When loading keys into or deleting keys from the agent, process
certificates only and skip plain keys.
-D Deletes all identities from the agent.
-d Instead of adding identities, removes identities from the
agent. If ssh-add has been run without arguments, the keys for
the default identities and their corresponding certificates
will be removed. Otherwise, the argument list will be inter-
preted as a list of paths to public key files to specify keys
and certificates to be removed from the agent. If no public
key is found at a given path, ssh-add will append .pub and
retry. If the argument list consists of “-” then ssh-add will
read public keys to be removed from standard input.
-E fingerprint_hash
Specifies the hash algorithm used when displaying key finger-
prints. Valid options are: “md5” and “sha256”. The default is
“sha256”.
-e pkcs11
Remove keys provided by the PKCS#11 shared library pkcs11.
-H hostkey_file
Specifies a known hosts file to look up hostkeys when using
destination-constrained keys via the -h flag. This option may
be specified multiple times to allow multiple files to be
searched. If no files are specified, ssh-add will use the de-
fault ssh_config(5) known hosts files: ~/.ssh/known_hosts,
~/.ssh/known_hosts2, /etc/ssh/ssh_known_hosts, and
/etc/ssh/ssh_known_hosts2.
-h destination_constraint
When adding keys, constrain them to be usable only through spe-
cific hosts or to specific destinations.
Destination constraints of the form ‘[user@]dest-hostname’ per-
mit use of the key only from the origin host (the one running
ssh-agent(1)) to the listed destination host, with optional
user name.
Constraints of the form ‘src-hostname>[user@]dst-hostname’ al-
low a key available on a forwarded ssh-agent(1) to be used
through a particular host (as specified by ‘src-hostname’) to
authenticate to a further host, specified by ‘dst-hostname’.
Multiple destination constraints may be added when loading
keys. When attempting authentication with a key that has des-
tination constraints, the whole connection path, including
ssh-agent(1) forwarding, is tested against those constraints
and each hop must be permitted for the attempt to succeed. For
example, if key is forwarded to a remote host, ‘host-b’, and is
attempting authentication to another host, ‘host-c’, then the
operation will be successful only if ‘host-b’ was permitted
from the origin host and the subsequent ‘host-b>host-c’ hop is
also permitted by destination constraints.
Hosts are identified by their host keys, and are looked up from
known hosts files by ssh-add. Wildcards patterns may be used
for hostnames and certificate host keys are supported. By de-
fault, keys added by ssh-add are not destination constrained.
Destination constraints were added in OpenSSH release 8.9.
Support in both the remote SSH client and server is required
when using destination-constrained keys over a forwarded
ssh-agent(1) channel.
It is also important to note that destination constraints can
only be enforced by ssh-agent(1) when a key is used, or when it
is forwarded by a cooperating ssh(1). Specifically, it does
not prevent an attacker with access to a remote SSH_AUTH_SOCK
from forwarding it again and using it on a different host (but
only to a permitted destination).
-K Load resident keys from a FIDO authenticator.
-k When loading keys into or deleting keys from the agent, process
plain private keys only and skip certificates.
-L Lists public key parameters of all identities currently repre-
sented by the agent.
-l Lists fingerprints of all identities currently represented by
the agent.
-q Be quiet after a successful operation.
-S provider
Specifies a path to a library that will be used when adding
FIDO authenticator-hosted keys, overriding the default of using
the internal USB HID support.
-s pkcs11
Add keys provided by the PKCS#11 shared library pkcs11. Cer-
tificate files may optionally be listed as command-line argu-
ments. If these are present, then they will be loaded into the
agent using any corresponding private keys loaded from the
PKCS#11 token.
-T pubkey ...
Tests whether the private keys that correspond to the specified
pubkey files are usable by performing sign and verify opera-
tions on each.
-t life
Set a maximum lifetime when adding identities to an agent. The
lifetime may be specified in seconds or in a time format speci-
fied in sshd_config(5).
-v Verbose mode. Causes ssh-add to print debugging messages about
its progress. This is helpful in debugging problems. Multiple
-v options increase the verbosity. The maximum is 3.
-X Unlock the agent.
-x Lock the agent with a password.
ENVIRONMENT
DISPLAY, SSH_ASKPASS and SSH_ASKPASS_REQUIRE
If ssh-add needs a passphrase, it will read the passphrase from
the current terminal if it was run from a terminal. If ssh-add
does not have a terminal associated with it but DISPLAY and
SSH_ASKPASS are set, it will execute the program specified by
SSH_ASKPASS (by default “ssh-askpass”) and open an X11 window
to read the passphrase. This is particularly useful when call-
ing ssh-add from a .xsession or related script.
SSH_ASKPASS_REQUIRE allows further control over the use of an
askpass program. If this variable is set to “never” then
ssh-add will never attempt to use one. If it is set to
“prefer”, then ssh-add will prefer to use the askpass program
instead of the TTY when requesting passwords. Finally, if the
variable is set to “force”, then the askpass program will be
used for all passphrase input regardless of whether DISPLAY is
set.
SSH_AUTH_SOCK
Identifies the path of a Unix-domain socket used to communicate
with the agent.
SSH_SK_PROVIDER
Specifies a path to a library that will be used when loading
any FIDO authenticator-hosted keys, overriding the default of
using the built-in USB HID support.
FILES
~/.ssh/id_dsa
~/.ssh/id_ecdsa
~/.ssh/id_ecdsa_sk
~/.ssh/id_ed25519
~/.ssh/id_ed25519_sk
~/.ssh/id_rsa
Contains the DSA, ECDSA, authenticator-hosted ECDSA, Ed25519,
authenticator-hosted Ed25519 or RSA authentication identity of
the user.
Identity files should not be readable by anyone but the user. Note
that ssh-add ignores identity files if they are accessible by others.
EXIT STATUS
Exit status is 0 on success, 1 if the specified command fails, and 2 if
ssh-add is unable to contact the authentication agent.
SEE ALSO
ssh(1), ssh-agent(1), ssh-askpass(1), ssh-keygen(1), sshd(8)
AUTHORS
OpenSSH is a derivative of the original and free ssh 1.2.12 release by
Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
Theo de Raadt and Dug Song removed many bugs, re-added newer features
and created OpenSSH. Markus Friedl contributed the support for SSH
protocol versions 1.5 and 2.0.
Debian December 18, 2023 SSH-ADD(1)
Generated by dwww version 1.16 on Tue Dec 16 06:17:50 CET 2025.